df005s thru df10s document number 88573 12-jul-05 vishay general semiconductor www.vishay.com 1 case style dfs ~ ~ ~ ~ miniature glass passivated single-phase surface mount bridge rectifiers major ratings and characteristics i f(av) 1 a v rrm 50 v to 1000 v i fsm 50 a i r 5 a v f 1.1 v t j max. 150 c features ul recognition, file number e54214 ideal for automated placement high surge current capability meets msl level 1, per j-std-020c solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for smps, lighti ng ballaster, adapter, bat- tery charger, home appliances, office equipment, and telecommunication applications mechanical data case: dfs epoxy meets ul-94v-0 flammability rating terminals: matte tin plated (e3 suffix) leads, solder- able per j-std-002b and jesd22-b102d polarity: as marked on body maximum ratings (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter symbol df005s df01s df02s df04s df06s df08s df10s unit device marking code df005s df01s df02s df04s df06s df08s df10s maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at t a = 40 c (2) i f(av) 1.0 a peak forward surge current single half sine-wave superimposed on rated load i fsm 50 a rating for fusing (t < 8.3 ms) i 2 t 10 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 150 c parameter test condition symbol df005s df01s df02s df04s df06s df08s df10s unit max. instantaneous forward voltage drop per leg at 1.0 a v f 1.1 v
www.vishay.com 2 document number 88573 12-jul-05 df005s thru df10s vishay general semiconductor thermal characteristics (t a = 25 c unless otherwise noted) notes: (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (2) units mounted on p.c.b. with 0.51 x 0.51" (13 x 13 mm) copper pads ratings and characteristics curves (t a = 25 c unless otherwise noted) maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg (1) c j 25 pf parameter symbol df005s df01s df02s df04s df06s df08s df10s unit typical thermal resistance per leg (2) r ja r jl 40 15 c/w parameter test condition symbol df005s df01s df02s df04s df06s df08s df10s unit figure 1. derating curve output rectified current figure 2. maximum non-repetitive peak forward surge current per leg 20 40 60 80 100 120 140 160 0 0.5 1.0 average forward output current (a) ambient temperature ( c) 60 h z resistive or inductive load p.c.b mounted on 0.51 x 0.51" (13 x 13 mm) copper pads 1 10 100 0 10 20 30 40 50 60 1.0 cycle peak forward surge current (a) number of cycles at 60 hz t j = 150 c single sine-wave figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1 10 instantaneous forward current (a) instantaneous forward voltage (v) t j =25c pulse width = 300 s 1% duty cycle 0 20 40 60 80 100 0.01 0.1 1 10 100 instantaneous reverse current ( a) percent of rated peak reverse voltage (v) t j = 125 c t j =50c
df005s thru df10s document number 88573 12-jul-05 vishay general semiconductor www.vishay.com 3 package outline dimensions in inches (millimeters) figure 5. typical junc tion capacitance per leg 1 10 100 1 10 100 junction capacitance (pf) reverse voltage (v) t j =25c f = 1.0 mhz vsig = 50mvp-p figure 6. typical trans ient thermal impedance 0.01 0.1 1 10 100 0.1 1 10 100 transient thermal impedance (c/w) t, heating time (sec.) mounting pad la yout 0.255 (6.5) 0.245 (6.2) 0.013 (0.330) 0.009 (0.241) 0.060 (1.524) 0.040 (1.016) 0.404 (10.3) 0.013 (0.330) 0.003 (0.076) 0.047 (1.20) 0.040 (1.02) 0.205 (5.2) 0.195 (5.0) 0.335 (8.51) 0.320 (8.13) 0.130 (3.3) 0.120 (3.05) 45 o 0.386 (9.80) case style dfs 0.404 max. (10.26 max.) 0.205 (5.2) 0.195 (5.0) 0.047 min. (1.20 min.) 0.060 min. (1.52 min.)
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
